Salto Heat Treating offers commercial heat treatment services with top-tier equipment and unmatched service. Cutting-edge equipment allows for higher capabilities, larger projects, quicker set-up time for recurring jobs, and product order charting and traceability. Our custom-built I.Q. line allows a 24 to 48-hour turnaround on most applications.
The Professional Treatment
Services
Salto Heat Treating Limited offers:
Annealing
Just about all materials can be annealed, annealing is a heat treatment process which alters the microstructure of a material to change its mechanical or electrical properties. Typically, in steels, annealing is used to reduce hardness and help eliminate internal stresses.
Through Hardening
In an atmosphere-controlled furnace, parts are heated to the exact temperature and then quenched in oil, ensuring minimal warping and uniform properties to the parts.
Case Hardening
Offers cost-effective solutions with fast turnaround for surface hardening and improved part or component wear resistance.
- Resists Wear
- Increased Toughness
- Longer Component Life
Carburizing
Also referred to as case hardening, carburizing is a process that produces a carbon gradient extending inward from the surface and a surface which is resistant to wear. This treatment is applied to both low carbon steel, and high alloy steel as well.
Air Hardening
Air hardening occurs in an I.Q. furnace which results in a better finish and appearance on the part, and controls the minimizing of oxide, scale, distortion and decarburization.
Normalizing
Normalizing is an annealing process applied to ferrous alloys to give the material a uniform fine-grained structure, and to avoid excess softening in steel. It involves heating the steel to 70-120°F above its upper critical point, soaking it at that temperature for a period of time.
Stress Relieving
Machining and welding induce stresses that can cause long-term distortions, cracking, and tolerance loss, especially in bigger and more complex parts. Stress relieving benefits large complex weldments, castings with heavy machining, and parts with tight dimensional tolerances. Our car bottom furnace can stress relief weldments up to 6 ft wide x 10 ft deep x 3 ft 3 in high and up to 10,000 lbs. We also offer industrial coating and sandblasting.
-
Width 6 ft
-
Depth 10 ft
-
Height 3 ft 3 in
-
Max. Weight 10,000 lbs
Cutting Services
Our H-32A HYDMECH saw is the largest HYDMECH saw in the region. Featuring a 32 in x 32 in capacity and at 30 ft long, we can straight-cut mild steel, hardened steel up to 60 HRC any thickness, square or round tubing, beams of all kind, angle iron, etc.
High Frequency Induction Hardening
The high frequency scanner is able to work with up to 22″ in length and to 4″ diameter material up to 80 lbs. Just like the low frequency scanner, our automated scanner takes only minutes rather than hours to set up with one of our many different diameter of coils. Our coil inventory allows for just about any job with industry leading turn around.
-
Length 22 in
-
Diameter 4 in
-
Max. Weight 80 LBS
Low Frequency Induction Hardening
While typical scanners can scan up to 3 feet, our equipment can scan up to 7ft, with a 9 1/2″ diameter and up to 1000 lbs. With 24 different diameters of coils in our inventory, we can do just about any job with quick turn around. Our automated scanner takes only minutes rather than hours to set up!
-
Length 7 ft
-
Diameter 9 1/2 in
-
Max. Weight 1000 lbs
Salto MetLab
The Salto MetLab includes Digital and Microstructure Testers. We also offer On-Site Hardness Testing. Salto Heat Treating provides Metallurgical Analysis.
Traceability
Salto Heat Treating vows to have your job done right the first time and every time. Our detailed traceability process ensures your pieces come out just the way you need them. Here’s how our process works:
Initialize
Your project is given a unique ID, then each of the expected parameters of the project is uploaded into our state-of-the-art machines.
Heat Treat
Your project enters its treatment process and every step of its journey is logged in our system. Data points for each process are recorded and checked against expected results. This ensures your project is on time and treated to specifications. (This can be viewed in your Customer Portal.)
Record and Complete
The final result of the treatment process is verified, documented and attached to your purchase order. With our detailed traceability, we can deliver repeat jobs with exact results every time.
Salto – The Next Generation of Heat Treating!
With technology constantly evolving, Salto has revolutionized the future of the heat-treating process with our new state of the art equipment and our custom-designed software.
Our team at Salto has over 35 years of experience in the Heat Treating Industry.
Salto provides the best quality of products and services available, to meet our customers demands.
Quality and Service Guaranteed
Salto Heat Treating offers full-treatment services with top-tier equipment and unmatched service. Cutting-edge equipment allows for higher capabilities, larger projects, quicker set-up time for recurring jobs, and product order charting and traceability.
Salto is now a proud member of the following associations and is certified to ISO 9001:2015: